Check out the biggest trends of the season and our expert take on them.
Marble adds a refined look to floors, walls and countertops. However, its porous surface can absorb spills quickly. The right marble stain cleaner can help tackle stains without causing further surface damage. First, identify the stain. Then choose a suitable marble stain remover and cleaning method.
Avoid acids, harsh abrasives and untested household cleaners. For difficult stains, professional assessment can help prevent permanent damage.
Marble is a natural stone with microscopic pores. Liquids can enter these pores and leave visible marks. Acidic substances can also react with marble. These reactions can dull or etch the surface.
Vinegar, lemon juice and other acidic substances can damage marble. Abrasive powders may also scratch its finish. Choose a pH-neutral marble cleaner when suitable. Always check the product instructions before use.
The right treatment depends on the type of stain. Do not use the same method for every mark.
Stain type | Recommended approach | What to avoid |
Oil or grease | Use a suitable stone cleaner designed for such stains | Strong solvents or abrasive powders |
Water rings | Clean gently with a suitable stone-care product | Vinegar or acidic cleaners |
Rust | Seek professional stone-care treatment | Acid-based rust removers |
Ink | Get the stain assessed before treatment | Scrubbing or aggressive chemicals |
When cleaning marble surfaces, always use a gentle, pH-neutral cleaner. Also, follow the product instructions without fail. Test the cleaner in a corner before using it on the rest of your marble surface. Tenax Tuff Kleen is an ideal choice for cleaning marble surfaces. Tuff Kleen is neutral and does not have any harsh chemicals. It also maintains the natural shine of your marble surfaces.
For a deeper or persistent stain, professional stone treatment may be more appropriate than repeated cleaning.
A poultice can draw certain absorbed stains towards the surface. However, the correct poultice depends on the stain and stone. Incorrect materials can worsen discolouration or damage the finish. For deep stains, seek professional stone-care advice instead of experimenting with household mixtures.
Avoid products that can react with or scratch the stone. This includes:
Marble can be quite delicate, and a single mistake can severely damage the surface. That’s why you should never use a cleaning liquid without first checking its compatibility with marble. Even if a product is marketed as compatible, you must still test it on a small area before using it on the rest of your floor or marble furniture.
Cleaning removes surface dirt and some stains. Sealing can help reduce future absorption. Tenax Proseal is designed for marble, granite, limestone, sandstone and terracotta. It works within the stone’s micro-porosities, providing stain protection while retaining the surface’s natural appearance.
Additionally, polishing can help restore the appearance of marble surfaces. Tenax Marvel Shine Pro is a polishing powder designed for marble and other stone surfaces. Clean the surface and address stains or etches before polishing.
1) How do I remove stains from marble?
First, identify the stain type. Then choose a suitable stone-care product. Avoid acids and abrasive cleaners. For deep stains, consult a professional.
2) Can I use acid on marble stains?
No, acidic products can react with marble and cause etching. Use products specifically designed for natural stone instead.
3) How do I remove water rings from marble?
Use a suitable stone-care cleaner and a soft cloth. Avoid vinegar, lemon juice and abrasive scrubbing.
4) How do I get oil stains out of marble?
Use a marble-safe cleaner designed for oil and grease. Follow the product instructions carefully. For persistent stains, seek professional advice.
5) How do I make marble shine again?
Clean the surface first. If the finish has dulled, suitable stone polishing may help. Address stains and etching before polishing.
6) Should marble be sealed after cleaning?
Sealing can help reduce future stain absorption. Choose a sealer suitable for your specific stone and surface finish.
This approach ensures the wall isn’t just ‘ready’ but rather bonded to the wall tile adhesive system.
