ROFF Crocodile Tiling FAQ Banner
Roff FAQ Banner Mobile

FAQs

Can tile adhesive be used as grout?

No, Roff tile adhesive and Roff grout are different products designed for different jobs: the adhesive bonds the tile to the substrate underneath, while grout fills the joints between tiles after the adhesive has cured. Using adhesive in place of grout is not recommended, since grout products like Roff Rainbow Tile Mate or the epoxy-based Roff Starlike are formulated for joint flexibility, stain resistance and, in the case of epoxy grout, added water and chemical resistance, properties a tile adhesive is not designed to provide once exposed on the surface.

Can tile adhesive be used for fixing stone slabs?

Yes, Roff tile adhesive can be used to fix stone slabs, with Roff Non-Skid Adhesive formulated specifically for natural stones on floors and walls. However, for heavier or larger stone slabs, factors like substrate strength, full adhesive coverage beneath the slab and adequate curing time become more critical than with standard ceramic tiles, since slabs carry more weight per unit area. For very heavy or oversized slabs on demanding substrates like metal or engineered surfaces, Roff Master Fix may be a more appropriate option.

How can I test if a tile adhesive bond is strong enough?

Roff tests its adhesives in controlled lab conditions using standardised bond strength and tensile adhesion tests before a product is released, so on real sites the practical check is different: tap tiles gently after curing to listen for a hollow sound, which can indicate an air gap or weak bond beneath the tile. Reviewing the technical data sheet for the specific Roff product used, which lists tested bond strength values, gives a benchmark for what the adhesive is designed to achieve when applied correctly with full coverage.

How does Roff tile adhesive compare with cement mortar for wall tiling?

Roff recommends tile adhesive over plain cement mortar for wall tiling because adhesive is applied in a much thinner layer, provides stronger initial grip that reduces tile slump on vertical surfaces, and offers polymer-enhanced flexibility that plain cement lacks. Cement mortar wall tiling typically requires more skilled labour to achieve consistent thickness and can be more prone to tiles slipping before the mortar sets. For projects wanting to upgrade an existing cement-mortar approach, Roff Tile Bonder can be mixed into sand-cement mortar to improve its bonding performance without switching to a full adhesive system.

Is tile adhesive waterproof by default?

No, Roff tile adhesive is not a waterproofing product by default; it is designed to bond tiles securely to a substrate, and while polymer modification does improve water resistance, it does not replace dedicated waterproofing. For areas with sustained moisture exposure, such as bathrooms, balconies or under-tile areas, Roff recommends applying a dedicated waterproof coating such as Roff Hyguard Ex or Roff Bond Repair to the substrate before tiling, so moisture is blocked at the surface level rather than relying on the adhesive layer to prevent seepage.

Roff tile adhesive technical data sheet – what should I look for?

Roff technical data sheets list the key performance details needed to select and apply an adhesive correctly, including the recommended substrate and tile type, coverage rate, open time, pot life, and curing period before grouting. They also specify mixing ratios with water, the type of trowel notch to use, and any surface preparation requirements. Checking these details against your tile size, substrate condition and site conditions such as temperature and humidity helps ensure the adhesive performs as intended. Full technical data sheets for each Roff product are available on the Technical Information section of roff.in.

What are the main types of tile adhesive available in India?

Roff’s range reflects the main types of tile adhesive available in India: standard cement-based adhesives such as Roff New Construction Adhesive for everyday ceramic and vitrified tiling, highly polymer-modified adhesives such as Roff Vitrofix Ultra and Yogafix for demanding or large-format tiles, specialty adhesives such as Roff Master Fix for non-traditional substrates like metal and plywood, and quick-set options such as Roff Vertifix for spot repairs. There are also epoxy-based systems, mainly used for grouting, such as Roff Starlike, which offer chemical and stain resistance beyond what cement-based products provide.

What is the best type of adhesive for tiling in India?

Roff considers polymer-modified, cement-based adhesive the standard for most Indian tiling projects because it bonds better, resists water more effectively, and reduces tile wastage compared with traditional sand-cement mortar. The right specific product depends on the tile material, size and location: Roff New Construction Adhesive suits standard ceramic floor tiling, Roff Vitrofix handles vitrified and natural stone, and Roff Extrofix is made for exterior cladding. Rather than one universal answer, Roff’s Adhesive Selector tool on roff.in matches the correct product to your exact tile and surface combination.

What is the difference between tile adhesive and cement glue?

Roff tile adhesive is a purpose-built, polymer-modified cement-based product engineered specifically for bonding tiles to a substrate, tested for open time, bond strength and flexibility, unlike generic cement glue or mortar mixed on-site without those controls. Because Roff adhesives are manufactured to consistent specifications listed on each product’s technical data sheet, results are more predictable across a project than with a hand-mixed cement-based glue, where proportions and quality can vary. Products like Roff New Construction Adhesive are designed for this reliability across everyday ceramic and vitrified tiling jobs.

What is the difference between tile adhesive and tile cement?

Roff tile adhesive is a polymer-modified, factory-controlled formulation designed specifically for bonding tiles, offering better flexibility, water resistance and adhesion than plain tile cement, which is essentially traditional sand-cement mortar mixed on-site. Tile cement’s performance can vary depending on how it’s mixed and the skill of the mason, while a Roff adhesive like Roff New Construction Adhesive is manufactured to consistent, tested specifications listed on its technical data sheet. For sites that still prefer traditional mortar, Roff Tile Bonder is a polymer additive that upgrades ordinary sand-cement mortar into an instant on-site adhesive.

What is the difference between tile glue and tile adhesive?

Roff tile adhesive refers to purpose-built, polymer-modified cement-based or specialty formulations engineered and tested specifically for bonding tiles to a substrate, with documented open time, bond strength and coverage on each technical data sheet. The term tile glue is often used more loosely for adhesive-type products, which may not be formulated or tested to the same standard for tiling applications specifically. Choosing a proper Roff tile adhesive product, matched to your tile type and substrate, ensures more predictable, tested performance than a generic glue product.

Why use tile adhesive instead of cement for tiling?

Roff tile adhesive is recommended over plain cement mortar because it is manufactured with consistent, tested formulations that bond more reliably to modern low-porosity tiles like vitrified and porcelain, which don’t absorb moisture the way older tile types did. Adhesive also allows a thinner application layer, reduces overall tile and material wastage, and includes polymer modification that improves flexibility and water resistance compared with plain sand-cement mortar. This combination generally results in a more durable installation with less risk of tiles debonding over time.